Login:
Password:
Register
Forgot your password?



Text here....
Hardness Testers

ТEMP-2 - - Portable programmed dynamic hardness tester

hardness ТEМP-2Hardness tester is intended for the express local measurement by a dynamic method of hardness in various products (from a steel, its alloys and welded joints, pig-iron, nonferrous metals, rubber, other materials) on scales of Brinell (НВ), Rockwell (HRC), Vickers (HV), Shore "D" (HSD) and also for strength definition on a stretching of products from carbonaceous steels pearlite a class in accordance with GOST 22791-77. Hardness tester can be used in industrial and laboratory conditions. 
Base scales can be written down at the enterprise who manufactured or independent on samples of hardness from the keyboard of the device or automatically calculation according to measurements and are written down from the personal computer. Up to 32 scales of hardness (HB, HRC, HV, HSD, HRB, HRN, HRT, HL and etc.) in total can be written down. With software use statistical data processing and their preservation on a disk is accessible. 
Hardness tester is certified in Gosstandart of Russia (the certificate № 9315 ), is registered in the National register of means of measurements under №15711-96 also admitted to application in the Russian Federation, Ukraine, Republic of Belarus and Kazakhstan. ТEМP-2 also is registered in the National register of Gosstandart of Ukraine, Republic of Belarus, Kazakhstan and in the branch Register of measuring apparatuses of Ministry of Railways of the Russian Federation under № МТ-021.2000.

Prices


  • Measurement of hardness details with difficult form
  • Automatic economy effort of power consumption
  • Presence of special transducers the different function, including transducer with the extended nozzle, allowing to measure hardness of gear wheels with the module four and above in hollows and on involute a tooth, and also hardness of pulleys, hard-to-reach spots, for example zones of thermal influence at welded platens on pipes strength
  • Averaging of measurement results
  • Memory: 99 measurement results with possibility to 
    transfer to PC
  • 10 additional scales programmable by PC or direct from keypad
  • Graphic LCD with brightness and the expanded temperature range
  • Mains power: 3 element "AA"
  • Weight 0.4 кg


Basic Delivery Set

  • ТEМP-2 hardness electronic module
  • Transducer with screened cable
  • Batteries (3 element "АА")
  • Cable RS232 for connection PC
  • Software support for PC
  • Transport bag


Technical Characteristics

A measurement range on a scale of Rockwell
22-68 HRC
A measurement range on a scale of Brinell
100-450 HB
A measurement range on a scale of Vickers
100-950 HV
A measurement range on a scale of Shore
22-99 HSD
Diameter spherical identation
3 mm
Hardness of a material identation
1600 HV
Measurement time
1 s
Minimum weight of a testing product
2 кg (measurement of details with smaller weight is possible at their grinding on a massive plate)
Roughness of a testing surface no more
Ra 2,5
Thickness of a wall of a supervised vessel of pressure or the pipeline
not less than 6 mm
Scales
up to 32 scales
Programmable scale
from keypad or by PC
Automatic calculation and programming of scales by means of the PC
yes
Сommunication with PC
RS232, USB (by adapter)
Number of measurements for definition average value of hardness
up to 4 to 100
Quantity of remembered measurements results in non-volatile memory
200
Mains power
2 batteries "АА"
Operating time
not less than 120 hours
Operating voltage
3 V
Operating temperature
up to -20 C to +60 C
Base Unit Dimensions (H x W x D)
135 mm x 65 mm x 30 mm
Weight with batteries
220 g (in the plastic case)
500 g (in the metal case)