|
|
Differential characteristic |
Basic Delivery Set |
Technical Characteristics
МVP-2М - multifunctional eddy-current tester
(thickness coating gauge/ferrite content meter/
electrical conductivity meter)
|
|
Multifunctional MVP-2M Instrument with plug-in type smart probes is suited for fast, non-destructive
and accurate measurement:
- ferrite content on-site or in the lab according to the magnetic inductive method;
- electrical conductivity of non-ferromagnetic metals by eddy-current method;
- measurement of paint or non-ferrous metal coatings (e.g., chromium, copper, zinc, etc.) on steel
using the magnetic induction method;
- measurement of paint, enamel or plastic coatings on non-ferrous materials using eddy-current method.
The test objects can be any products including with large sized with inaccessible measuring zone which have
radius of curvature no more less 5 mm.
Adjustable gain allows to operate with various probes and to test different metals.
It is certificated by Gosstandart of Russia
(the certificate RU.C.27.003.A № 16288 ) and it is registered in the National
register of measuring instruments under №25869-03.
|
At starting |
Basic Delivery Set |
Technical Characteristics
- Indication of probe contact
with test surface
- Automatic switch-off if the probe contact will be absent for about 15 minutes
- Average mode
- Adjustable gain: 10 to 100 dB
- The tester can automatically economize power if the contact will be absent during 10 seconds
|
- Memory:5000 measurement results with possibility to display theirs on the indicator or to transfer to PC
- Possibility to program about 15 scales by using keypad or PC
- Power units: built-in Li-Ion battery
- Weight: 270 g
|
At starting |
Differential characteristic |
Technical Characteristics
Basic Delivery Set
- МVP-2М main unit
- Power supply
- Ф010 probe (measures ferritic content)
- PC interface RS 232
- Operating manual
- Software
- Carry case
Universal Delivery Set
- Basic Delivery Set
- П020 probe (measures electrical conductivity)
Expert delivery set
- Basic Delivery Set
- П020 probe (measures electrical conductivity)
- М020 probe (measures thickness from 0-2mm on ferromagnetic basis)
- Н020 probe (measures thickness from 0-2 mm on non-ferromagnetic basis)
Probes
- Ф010 (ferritic content, range 0,1-25%)
- Ф480 (ferritic content, range 4-80%)
- П020 (electrical conductivity, range 0,05-70 MS/m)
- М120 (range 0-2mm, ferromagnetic)
- М150 (range 0,05-5mm, ferromagnetic)
- М215 (range 2-15mm, ferromagnetic)
- H120 (range 0-2mm, non-ferromagnetic)
- H150 (range 0,05-5mm, non-ferromagnetic)
- H215 (range 2-15mm, non-ferromagnetic)
Related Products
- Calibration Standard set for F010
- Calibration Standard set for P020
- Commercial Grade Shim Set КМТ-1 (5 plastic shims)
- Commercial Grade Shim Set КМТ-2 (7 plastic shims + ferrous or non-ferrous zero plate)
|
At starting |
Differential characteristic |
Basic Delivery Set
Technical Characteristics
- Ferrite content measurement range
- 0.1% to 80%
- Electrical conductivity measurement range
- 0.5 to 70 MS/m
- Coating thickness measurement range
- 0 to 15 mm
- Gain
- 10 to 100 dB
- Scales
- 15 programmable direct from keypad
or by PC scales, up to 10 points
for linear approximation
- Indication accuracy
- 1, 0.1, 0.01 or 0.001 - is
set at programming scales
- Mains power
- build-in Li-Ion battery or via external
plug-in power unit 220 V AC
- Battery operating time
- not less than 50 hours
- Operating voltage
- 5 V
- Operating temperature
- -10 C to +50 C
- Basic Unit Dimensions (H x W x D)
- 150 mm x 80 mm x 40 mm
- Weight
- 270 g
|
At starting |
Differential characteristic |
Basic Delivery Set
|
