|
|
Differential characteristic |
Basic Delivery Set |
Technical Characteristics
VECTOR - new universal eddy-current flaw-detector
|
|
New eddy-current flaw detector with rich functionalities for the decision of all circle of problems
of the testing of ferromagnetic and non ferromagnetic materials a method of vortical currents.
Flaw detector it is intended for testing and definition of the size of superficial defects of pipes,
bars and other products, measurement of thickness of coatings, definition conductivity and other physical
properties of materials, quality assurance welded and brazed joints and the decision of other problems of
the testing.
The device is certificated by Federal Agency on Technical Regulation and the testing (certificate RU.C.27.003.A ¹ 26699) also registered in the National register of means of measurements under ¹33845-07. |
At starting |
Basic Delivery Set |
Technical Characteristics
- Small dimensions and weight
- Big LCD the display with adjustable brightness and contrast, well visible both
in darkness and at a direct sunlight
- The simple and clear organization of the menu and the keyboard
- Various kinds of zones alarm mode with logic of definition of defect
|
- Rich functionalities an the broad audience of solved problems
- Opportunity of connection of various transducers
- Storing of a plenty of adjustments and results of the testing
- Port RS 232 for communication with the personal computer
- Mains power: from lithium-ionic of batteries
|
At starting |
Differential characteristic |
Technical Characteristics
Basic Delivery Set
- The electronic module ultrasonic eddy current
- Power supply
- Two transducers
- Cables for transducers
- Batteries
- Cable RS 232 for connection of the personal computer
- The software for the personal computer
- Transport bag
|
At starting |
Differential characteristic |
Basic Delivery Set
Technical Characteristics
- Range of adjustments of entrance strengthening
- from 0 up to 70 dB, with step 1, 2,4 and 6 dB
- Range of changes of frequency
- from 100 MHz to 10 MHz, with step 1, 10,100 and 1000 Hz
- Amplitudes of a target pressure
- 0, 6 or 11V
- Range of change of a phase of a vector
- 360 hailstones, with step 1 hailstones
- The filter of low-frequency
- 200, 400, 800, 1600 Hz
- The filter of high-frequency
- 20, 40, 80, 160 Hz
- Mode of the generator
- usual, two-frequency
- Kind of the schedule
- X(y), X(t), Y(t), A(t), F(t)
- Loop of schedule
- 0..10 sec, with step 1 sec
- Digital increase
- in 1, 2 and 5 times
- Zone alarms modes
- a box: -112…112 with step 1(the rights, a lion);
- Alarm modes
- defect in a-zone; defect outside of a-zone
- Types of a conclusion to the screen
- a vector, a point
- Change of scale on one of coordinates X,Y
- 8:1, 4:1, 2:1, 1:1, 1:2, 1:4,1:8
- Types of transducers
- differential, absolute
- Operating voltage
- 15-18V DC
- Time of independent work
- 8 hours (without brightness)
- Display
- 120 x 90 mm LCD with the sanction both adjustable brightness
and contrast,white illumination of the raised brightness.
- Operating temperature
- +5 to +55 Ñ
- Dimensions of the electronic block (H x W x D)
- 195 mm x 175 mm x 30 mm
- Weight with elements of a power supply
- 2,5 kg
|
At starting |
Differential characteristic |
Basic Delivery Set
|